Cup Counter Anemometer

A cup anemometer is used to calculate the velocity of wind. The three flat aligned sphere-shaped cups, which are static at right angles or in a stellar form on the perpendicular axis of the cup anemometer, measure the breeze velocity.

It working principle is very simple the resilient the breeze blows, the quicker the partial open plastic cups move. The velocity of the cross revolution regulates the breeze speed.

This PCE breeze flow meter, also denoted as the cup anemometer, proposals an important benefit in association to the typical impeller anemometers.

The breeze track is not of vital significance in the calculation of the movement rate. In instruction to be capable to finds the breeze velocity finely, the cup anemometer, an alteration to the impeller anemometer, does not have to be retained correctly in the breezeway.

The placement of the half cups in changed directions confirms that the cup stellar is fixed in indication free of the path. Thus, the flat and less weight cup responds to even the lowest movement speeds. With the perseverance of 0.1 m /seconds, the gaging assortment of the cup anemometer is from 0.9 m / s up to 35 m / s. There are dissimilar components for the movement speeds with m /second, km/hour, knots, miles/hour, ft/min accessible.

The cup anemometer measures the numeral of revolutions per minute and thus the breeze velocity very precisely. The breeze velocity can be expediently read out from the LCD show (28 x 19 mm) of the cup anemometer.

The anemometer of PCE Tools stocks extreme and least standards, which can be suitably delivered over on the display far ahead.

To confirm that the previous dimensions’ consequences showed can be observed again, the cup anemometer also has a concrete data grasp task. The calculation statistics are noted and stowed by a valuable 100 point statistics logger.

The cup anemometer is manifest IP 65, encounters all the circumstances, and is thus secure in contrast to the dispersion of dirt and humidity.

To save the battery of an anemometer to discharge when it is not in working condition, the meter has an auto power-off controller. After some meter turns off when it finished its working.